FAQ
Find your answers here
Warranty
What type of warranty does my Holster/Sheath come with?
At Clip & Carry we stand by our products.
You can follow this link and request the part you need and all you pay is for
the shipping and handling:
https://www.clipandcarry.us/warranty
I lost the screws/beltclip, can I request a new one?
YES! At Clip & Carry we stand by our products with a lifetime warranty.
You can follow this link and request the part you need
and all you pay is for the shipping and handling
https://www.clipandcarry.us/warranty
Some customers report using blue LOCTITE once they find the level of retention
that works for them.
My sheath/holster cracked. Does the warranty cover this?
YES! If it cracked through normal use you can contact us and
send a photo showing the issue and follow this link and request the part you need and all you pay is for the shipping and handling:
https://www.clipandcarry.us/warranty
or email sales@clipandcarry.us
I lost the screws/b-b
https://www.clipandcarry.us/warranty
Some customers report using blue LOCTITE once they find the level of retention
that works for them.
Multitool Sheath & Gun Holster
How can I adjust the retention for my Sheath or Holster?
To adjust the fit using the retention screw:
1. Hold the Anchor: Use a flathead screwdriver on the back
to secure the anchor.
2. Adjust the Retention: Use a Phillips screwdriver to
tighten or loosen the front screw as needed.
This will allow you to fine-tune the fit of your firearm and multitool.
I don’t see my model listed, can I make a custom order?
No, unfortunately we are not able to offer custom jobs at this time.
I don’t see my model listed, are you making new models?
Yes, we are making new sheaths and holsters all the time. Feel
free to join our mailing list to stay up to date with our new releases: https://www.clipandcarry.us/pages/contact-us
What size belt do your belt clips work with?
Our sheaths and holsters work with belts up to 1.75”.
For a wider belt, or duty belt, we also offer the TEKLOK or
MOLLE clip here: https://www.clipandcarry.us/collections/hardware-accessories
I think I received the wrong handed holster can you help me exchange this?
Sure. Often times customers forget that this is an IWB- Inside the Waistband Holster and so it actually goes inside the waist band with the holster against your body and the belt clip facing outwards.
If you still feel you received the wrong model, please send us an email with a photo of the front of the holster and the back of the packaging with UPC for us to best assist you to: sales@clipandcarry.us
My pistol almost the same as one of the models featured, will it fit your holster?
No. in order to make the holsters fit safely and securely they are custom molded to the models specified. Any variation of the model not listed will not fit.
I put a reddot- RMR, or flashlight on my pistol, will it still work with your holster?
If you installed an RMR or red dot optic, yes, our holsters can accommodate these.
They CAN NOT accommodate a flashlight mounted to the pistol.
In order to make the holsters fit safely and securely they are custom molded to the models specified. Any variation of the model not listed will not fit.
Collapsible row
Products
Strapt-Tac: Can you explain the difference between the “Appendix Rig Size” and the “Holster Size”?
Strapt:
Can you
explain the difference between the “Appendix Rig Size” and the “Holster Size”?
Strapt-Tac: I don’t see my model listed, can I make a custom order?
No, unfortunately we are not able to offer custom jobs at this time.
I am between two sizes, which size should I get?
Good question! We recommend getting the larger size, since
you can always wrap the extra belt length around you but if it is too short
then it is difficult to use at all.
PRODUCTS
Strapt-Tac
Can you explain the difference between the “Appendix Rig Size” and the “Holster Size”?
Of course!
The Appendix Rig Size is for an appendix rig which is
usually a holster and a built in mag holder aka sidecar.
The holster version is just for the gun inside your holster.
Appendix rig version is wider than the holster version, for obvious reasons.
The band also comes with a nylon sheath for a spare mag to
carry it horizontal or vertical on the belt. What I generally recommend is the
holster size unless you always carry an appendix rig, as the less material the
easier it is to ensure your not printing with extra material.
I am between two sizes, which size should I get?
Good question! We recommend getting the larger size, since
you can always wrap the extra belt length around you but if it is too short
then it is difficult to use at all.
Collapsible row
Orders
I ordered the wrong item. How can I cancel an order?
Please contact our sales team at sales@clipandcarry.us
with the subject line “CANCEL AN ORDER- #” and include your order number.
How can I open a Wholesale account?
Please contact our sales team at sales@clipandcarry.us
I would like to review your product on social media, who do I contact?
Fantastic! Please contact
our sales team at sales@clipandcarry.us
with your social media handles and what products you are interested in and we
will be in touch.